Skip to content

NY’s ASAP Act – Accelerate Solar for Affordable Power

New York, let's build 20GW of Solar capacity by 2035 ☀️

As New York looks for policies that will most effectively reduce energy bills for New Yorkers, distributed solar paired with storage shows a clear path forward. Solar is the least expensive electricity source on earth, and it is New York’s most successful clean energy sector- reaching its CLCPA goals over a year ahead of schedule and under budget.

The Accelerate Solar for Affordable Power (ASAP Act) is a key piece of solar legislation supported by TH!RD ACT Advocates for New York State Climate Policies and coalition partners.

On January 28th, NYSEIA’s Policy Director, Jonathan Cohen, delivered NYSEIA’s Testimony at the Energy and Environmental Conservation Committees Hearing on the 2026 Executive Budget Proposal.

NYSEIA’s single budget ask, the Accelerate Solar for Affordable Power Act, is a $1 billion energy savings opportunity for all New Yorkers. The ASAP Act targets energy insecurity, and unlocks energy savings for all New Yorkers in wholesale energy costs, as well as providing millions in upfront utility bill savings for those with solar + storage.

ASAP Act (A8758 Barrett / S6570 Harckham)

Accelerate Solar for Affordable Power Act: 1) raises New York’s distributed solar capacity (residential, commercial, and community solar) capacity goal to 20 GW by 2035; and 2) directs Public Service Commission to enact reforms to the utility interconnection process to ensure new distributed energy resources can be integrated more quickly and cost-effectively.

Download and share the ASAP ONE PAGER

Further Reading on Overcoming Safety Concerns:

Plug-in photovoltaic (PIPV) solar systems introduce hazards that can compromise existing electrical protection measures.

Overcurrent Protection Challenges – Branch circuits are designed for one-way power flow—from the panelboard to the load. When a plug-in solar system backfeeds power into the same circuit, the combined current from the utility and plug-in solar source can exceed conductor ratings without tripping the circuit breaker. This undetected overload poses risks of fire and electric shock.  Solutions: Dedicated circuits with unique receptacles to prevent overloads; Integrated overcurrent protection at the point of connection.

Touch Safety Hazards – Grid-interactive inverters used in plug-in solar systems are not evaluated for user contact safety. Accessible plug blades can become energized when exposed to sunlight, creating a shock hazard for consumers. Solution: Unique plug configurations to avoid unsafe installations.

Ground-Fault Circuit Interrupter (GFCI) Compatibility – Plug-in solar systems can compromise GFCI protection, a critical safety feature in outdoor and wet locations. Current GFCI standards assume unidirectional current flow, but plug-in solar introduces bidirectional flow, potentially blinding GFCIs and leaving circuits unprotected. Solution: Bidirectional GFCI devices to maintain shock protection under backfeed conditions.

Whitepaper by UL Solutions explains the concerns regarding plug-in solar systems.

Safety Considerations for Plug-In Photovoltaic (PIPV) Systems – Summary: https://www.ul.com/insights/safety-considerations-plug-photovoltaic-pipv-systems 

PV Magazine article that is well worth the read: https://pv-magazine-usa.com/2026/01/13/a-guidebook-on-plug-in-balcony-solar-for-state-level-policymakers/

 

Disclaimer: Working Groups are volunteer-run groups organized by affinity or by geographic location. Working Groups engage in campaign activities, communicate with their Working Group volunteers, and maintain the content on their Working Group webpages.